View MKP1848580084K2_8706378.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 1 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 metallized polypropylene film capacitors dc-link capacitor features ? high performance dc filter ?low esr ? high peak current capabilities ? high rms current capabilities ? aec-q200 qualified ? mounting: radial ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications ? high performance dc filtering ? hev / ev: i.e. power train and obc ? renewable energies inverters ? motor drives ? power supplies notes ?for more detailed data and test requirements, contact dc-film@vishay.com ? for general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) see document voltage proof test for metalized film capacitors ( www.vishay.com/doc?28169 ) quick reference data rated capacitance ra nge 1 f to 400 f capacitance tolerance 5 % rated voltage range, u ndc 450 v to 1200 v climatic testing class 40/105/56 rated temperature 85 c maximum permissible case temperatur e 105 c, observing voltage derating maximum applicable peak to peak ripple voltage 0.2 x u ndc reference standards iec 61071, iec 60068 dielectric polypropylene film electrodes metallized dielectric capacitor construction mono construction encapsulation plastic case, sealed with resin; flame retardant terminals tinned wires self inductance (l s ) < 1 nh per mm of lead spacing withstanding dc volt age between terminals (1) 1.5 u ndc for 10 s, cut off current 10 ma, rise time ? 1000 v/s insulation resistance rc between leads, after 1 min > 10 000 s for u ndc ? 500 v measuring voltage 100 v for u ndc > 500 v measuring voltage 500 v life time expectancy useful life time: > 100 000 h at u ndc and 70 c fit: < 10 x 10 -9 /h (10 per 10 9 component h) at 0.5 x u ndc , 40 c marking c-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturers type designation; manufacturers logo; year and week of manufacture dc voltage ratings u ndc at 85 c 450 v 700 v 800 v 900 v 1100 v 1200 v u opdc at 70 c 500 v 800 v 900 v 1100 v 1350 v 1500 v u opdc at 105 c 300 v 500 v 570 v 650 v 800 v 850 v
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 2 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 composition of catalog number note (1) tabs terminals or customized terminals are available on request dimensions in millimeters 2 pins 4 pins mkp 1848 6 12 09 4 p 4 capacitance (numerically) example: 512 1200 nf 1.2 f 612 12 000 nf 12 f 712 120 000 nf 120 f multiplier (nf) 10 4 100 5 1000 6 10 000 7 type construction voltage u n = 45 = 450 v dc u n = 70 = 700 v dc u n = 08 = 800 v dc u n = 09 = 900 v dc u n = 91 = 1100 v dc u n = 92 = 1200 v dc special code for terminal 2 2 pins 4 4 pins p2 = 10.2 mm 5 4 pins p2 = 20.3 mm (1) customized tolerance 4 5 % metallized polypropylene p1 (mm) pitch code 27.5 k 37.5 p 52.5 y h w ? dt i 6 - 1 p1 0.4 - pcm 27.5 mm p1 0.5 - pcm 37.5 mm p1 p1 0.5 marking i w 6 - 2 ? dt p2 0.5 h p1 p2 p2
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 3 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? ? dt 10 % of standa rd diameter specified 6 pins 12 pins electrical data and ordering code u ndc at 85 c (v) cap. (8) (f) dimension (5) (mm) p1 (mm) p2 (mm) dv/dt (v/s) i peak (a) i rms (2) (a) esr (3) (m ? ) tan ? 10 khz (< 10 -4 ) (4) ordering code (1) wh l 2 pins 4 pins 2 pins 4 pins 2 pins 4 pins 450 u opdc at 70 c = 500 v, u opdc at 105 c = 300 v 1 9.0 19.0 32.0 27.5 - 75 75 2.5 - 54 - 85 - mkp1848510454k2 2 9.0 19.0 32.0 27.5 - 75 150 3 - 34.5 - 85 - mkp1848520454k2 3 11.0 21.0 32.0 27.5 - 75 225 4 - 23.0 - 85 - mkp1848530454k2 4 11.0 21.0 32.0 27.5 - 75 300 4 - 20.5 - 85 - mkp1848540454k2 5 13.0 23.0 32.0 27.5 - 75 375 5 - 16.5 - 85 - mkp1848550454k2 6 15.0 25.0 32.0 27.5 - 75 450 6 - 13.5 - 85 - mkp1848560454k2 7 15.0 25.0 32.0 27.5 - 75 525 6.5 - 11.5 - 85 - mkp1848570454k2 8 18.0 28.0 32.0 27.5 - 75 600 8.5 - 8.5 - 85 - mkp1848580454k2 9 18.0 28.0 32.0 27.5 - 75 675 8.5 - 9.0 - 85 - mkp1848590454k2 10 18.0 28.0 32.0 27.5 - 75 750 9 - 8.0 - 85 - mkp1848610454k2 12 21.0 31.0 32.0 27.5 - 75 900 10 - 7.0 - 85 - mkp1848612454k2 15 20.0 35.0 32.0 27.5 - 75 1125 11.5 - 6.0 - 85 - mkp1848615454k2 10 18.5 35.5 43.0 37.5 10.2 40 400 7.5 8 13.5 12.0 160 140 mkp1848610454p* dimensions in millimeters i p1 marking w h 6 - 2 ? dt p2 2 x p2 p1 p2 p2 i p1 marking h 6 - 2 ? dt p2 2 x p2 3 x p2 4 x p2 5 x p2 w p1 p2 2 x p2 3 x p2 4 x p2 5 x p2
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 4 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 450 u opdc at 70 c = 500 v, u opdc at 105 c = 300 v 12 18.5 35.5 43.0 37.5 10.2 40 480 8 8.5 11.5 10.0 160 140 mkp1848612454p* 15 18.5 35.5 43.0 37.5 10.2 40 600 9 10 9.0 8.0 160 140 mkp1848615454p* 20 21.5 38.5 43.0 37.5 10.2 40 800 11 12 7.0 6.0 160 140 mkp1848620454p* 22 21.5 38.5 43.0 37.5 10.2 40 880 11 11.5 7.5 6.5 160 140 mkp1848622454p* 25 21.5 38.5 43.0 37.5 10.2 40 1000 11.5 12.5 6.5 5.5 160 140 mkp1848625454p* 30 24.0 44.0 42.0 37.5 10.2 40 1200 13.5 15 5.5 4.5 160 140 mkp1848630454p* 35 30.0 45.0 42.0 37.5 10.2 / 20.3 40 1400 17 18.5 4.0 3.5 160 140 mkp1848635454p* 40 30.0 45.0 42.0 37.5 10.2 / 20.3 40 1600 17 18.5 4.0 3.5 160 140 mkp1848640454p* 40 25.0 45.0 57.5 52.5 10.2 20 800 13 13.5 6.5 6.0 310 280 mkp1848640454y* 45 25.0 45.0 57.5 52.5 10.2 20 900 12.5 13.5 7.0 6.0 310 280 mkp1848645454y* 50 30.0 45.0 57.5 52.5 20.3 20 1000 15 15.5 5.5 5.0 310 280 mkp1848650454y* 55 30.0 45.0 57.5 52.5 20.3 20 1100 15 15.5 5.5 5.0 310 280 mkp1848655454y* 60 30.0 45.0 57.5 52.5 20.3 20 1200 15.5 16.5 5.0 4.5 310 280 mkp1848660454y* 65 35.0 50.0 57.5 52.5 20.3 20 1300 19 20.5 4.0 3.5 310 280 mkp1848665454y* 70 35.0 50.0 57.5 52.5 20.3 20 1400 18 19 4.5 4.0 310 280 mkp1848670454y* 75 35.0 50.0 57.5 52.5 20.3 20 1500 19 20.5 4.0 3.5 310 280 mkp1848675454y* 80 35.0 50.0 57.5 52.5 20.3 20 1600 19 20.5 4.0 3.5 310 280 mkp1848680454y* 90 45.0 45.0 57.5 52.5 20.3 20 1800 - 21.5 - 3.0 - 280 mkp1848690454y5 95 45.0 45.0 57.5 52.5 20.3 20 1900 - 21.5 - 3.0 - 280 mkp1848695454y5 100 45.0 45.0 57.5 52.5 20.3 20 2000 - 23.5 - 2.5 - 280 mkp1848710454y5 200 70.0 65.0 57.5 52.5 20.3 20 2000 - 30.5 - 2.0 - 310 mkp1848720454y5 (6) 400 130 65.0 57.5 52.5 20.3 10 4000 - 50.5 - 1.5 - 380 mkp1848740454y5 (7) 700 u opdc at 70 c = 800 v, u opdc at 105 c = 500 v 1 9 19 32 27.5 - 75 75 2.5 - 54 - 68 - mkp1848510704k2 2 9 19 32 27.5 - 75 150 3 - 34.5 - 68 - mkp1848520704k2 3 11 21 32 27.5 - 75 225 4 - 23 - 68 - mkp1848530704k2 4 13 23 32 27.5 - 75 300 5 - 17 - 68 - mkp1848540704k2 5 15 25 32 27.5 - 75 375 6 - 14 - 68 - mkp1848550704k2 6 18 28 32 27.5 - 75 450 7.5 - 11.5 - 68 - mkp1848560704k2 7 18 28 32 27.5 - 75 525 8 - 10 - 68 - mkp1848570704k2 8 18 28 32 27.5 - 75 600 8.5 - 8.5 - 68 - mkp1848580704k2 9 21 31 32 27.5 - 75 675 10 - 7.5 - 68 - mkp1848590704k2 10 21 31 32 27.5 - 75 750 10 - 7 - 68 - mkp1848610704k2 12 20 35 32 27.5 - 75 900 11.5 - 6 - 68 - mkp1848612704k2 10 18.5 35.5 43 37.5 10.2 40 400 7.5 8 13.5 12 135 120 mkp1848610704p* 12 18.5 35.5 43 37.5 10.2 40 480 8 8.5 11.5 10 135 120 mkp1848612704p* 15 18.5 35.5 43 37.5 10.2 40 600 9 10 9 8 135 120 mkp1848615704p* 20 21.5 38.5 43 37.5 10.2 40 800 11 12 7 6 135 120 mkp1848620704p* 22 24 44 42 37.5 10.2 40 880 13 13.5 6 5.5 135 120 mkp1848622704p* 25 24 44 42 37.5 10.2 40 1000 13.5 14.5 5.5 5 135 120 mkp1848625704p* 30 30 45 42 37.5 10.2 / 20.3 40 1200 16 17 4.5 4 135 120 mkp1848630704p* electrical data and ordering code u ndc at 85 c (v) cap. (8) (f) dimension (5) (mm) p1 (mm) p2 (mm) dv/dt (v/s) i peak (a) i rms (2) (a) esr (3) (m ? ) tan ? 10 khz (< 10 -4 ) (4) ordering code (1) wh l 2 pins 4 pins 2 pins 4 pins 2 pins 4 pins
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 5 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 700 u opdc at 70 c = 800 v, u opdc at 105 c = 500 v 35 30 45 42 37.5 10.2 / 20.3 40 1400 17 18.5 4 3.5 135 120 mkp1848635704p* 30 25 45 57.5 52.5 10.2 20 600 11 12 9 8 270 240 mkp1848630704y* 35 25 45 57.5 52.5 10.2 20 700 12 12.5 7.5 7 270 240 mkp1848635704y* 40 25 45 57.5 52.5 10.2 20 800 13 13.5 6.5 6 270 240 mkp1848640704y* 45 30 45 57.5 52.5 20.3 20 900 14.5 15 6 5.5 270 240 mkp1848645704y* 50 30 45 57.5 52.5 20.3 20 1000 15 15.5 5.5 5 270 240 mkp1848650704y* 55 35 50 57.5 52.5 20.3 20 1100 17 18 5 4.5 270 240 mkp1848655704y* 60 35 50 57.5 52.5 20.3 20 1200 18 19 4.5 4 270 240 mkp1848660704y* 65 35 50 57.5 52.5 20.3 20 1300 19 20.5 4 3.5 270 240 mkp1848665704y* 70 45 45 57.5 52.5 20.3 20 1400 - 20 - 3.5 - 240 mkp1848670704y5 75 45 45 57.5 52.5 20.3 20 1500 - 21.5 - 3 - 240 mkp1848675704y5 80 45 45 57.5 52.5 20.3 20 1600 - 21.5 - 3 - 240 mkp1848680704y5 160 70 65 57.5 52.5 20.3 20 3200 - 30.5 - 2.5 - 280 mkp1848716704y5 (6) 320 130 65 57.5 52.5 20.3 20 6400 - 54 - 1.3 - 280 mkp1848732704y5 (7) 800 u opdc at 70 c = 900 v, u opdc at 105 c = 570 v 1 9 19 32 27.5 - 75 75 2 - 62.5 - 60 - mkp1848510084k2 2 11 21 32 27.5 - 75 150 3.5 - 31 - 60 - mkp1848520084k2 3 13 23 32 27.5 - 75 225 4.5 - 21 - 60 - mkp1848530084k2 4 15 25 32 27.5 - 75 300 5.5 - 15.5 - 60 - mkp1848540084k2 5 18 28 32 27.5 - 75 375 7 - 12.5 - 60 - mkp1848550084k2 6 18 28 32 27.5 - 75 450 7.5 - 10.5 - 60 - mkp1848560084k2 7 21 31 32 27.5 - 75 525 9 - 9 - 60 - mkp1848570084k2 8 21 31 32 27.5 - 75 600 9.5 - 8 - 60 - MKP1848580084K2 9 20 35 32 27.5 - 75 675 10 - 8 - 60 - mkp1848590084k2 10 18.5 35.5 43 37.5 10.2 40 400 8 8.5 12.5 11 122 110 mkp1848610084p* 12 18.5 35.5 43 37.5 10.2 40 480 8.5 9 10.5 9 122 110 mkp1848612084p* 15 21.5 38.5 43 37.5 10.2 40 600 10 11 8.5 7.5 122 110 mkp1848615084p* 20 24 44 42 37.5 10.2 40 800 13 13.5 6 5.5 122 110 mkp1848620084p* 22 30 45 42 37.5 10.2 / 20.3 40 880 14.5 15.5 5.5 5 122 110 mkp1848622084p* 25 30 45 42 37.5 10.2 / 20.3 40 1000 15.5 16 5 4.5 122 110 mkp1848625084p* 30 25 45 57.5 52.5 10.2 10 300 12 12 8 7.5 240 215 mkp1848630084y* 35 30 45 57.5 52.5 20.3 10 350 13 14.5 7 6 240 215 mkp1848635084y* 40 30 45 57.5 52.5 20.3 10 400 14.5 15 6 5.5 240 215 mkp1848640084y* 45 35 50 57.5 52.5 20.3 10 450 16 17 5.5 5 240 215 mkp1848645084y* 50 35 50 57.5 52.5 20.3 10 500 17 18 5 4.5 240 215 mkp1848650084y* 55 45 45 57.5 52.5 20.3 10 550 - 18.5 - 4 - 215 mkp1848655084y5 60 45 45 57.5 52.5 20.3 10 600 - 20 - 3.5 - 215 mkp1848660084y5 120 70 65 57.5 52.5 20.3 10 1600 - 27 - 3.2 - 215 mkp1848712084y5 (6) 240 130 65 57.5 52.5 20.3 10 3200 - 48.5 - 1.6 - 215 mkp1848724084y5 (7) electrical data and ordering code u ndc at 85 c (v) cap. (8) (f) dimension (5) (mm) p1 (mm) p2 (mm) dv/dt (v/s) i peak (a) i rms (2) (a) esr (3) (m ? ) tan ? 10 khz (< 10 -4 ) (4) ordering code (1) wh l 2 pins 4 pins 2 pins 4 pins 2 pins 4 pins
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 6 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 900 u opdc at 70 c = 1100 v, u opdc at 105 c = 650 v 1 9 19 32 27.5 - 40 40 2 - 63 - 50 - mkp1848510094k2 2 13 23 32 27.5 - 80 160 3.5 - 32 - 50 - mkp1848520094k2 3 15 25 32 27.5 - 80 240 5 - 21 - 50 - mkp1848530094k2 4 18 28 32 27.5 - 80 320 6 - 16 - 50 - mkp1848540094k2 5 21 31 32 27.5 - 80 400 7.5 - 13 - 50 - mkp1848550094k2 6 21 31 32 27.5 - 80 480 8.5 - 10 - 50 - mkp1848560094k2 7 20 35 32 27.5 - 80 560 9 - 9 - 50 - mkp1848570094k2 5 18.5 35.5 43 37.5 10.2 20 100 6 6.5 21 19 100 90 mkp1848550094p* 6 18.5 35.5 43 37.5 10.2 40 240 6.5 7 18 16 100 90 mkp1848560094p* 7 18.5 35.5 43 37.5 10.2 40 280 6.5 7 18 16 100 90 mkp1848570094p* 8 18.5 35.5 43 37.5 10.2 40 320 7 7.5 16 14 100 90 mkp1848580094p* 9 18.5 35.5 43 37.5 10.2 40 360 7.5 8 14 12 100 90 mkp1848590094p* 10 21.5 38.5 43 37.5 10.2 40 400 8.5 9 12 11 100 90 mkp1848610094p* 12 21.5 38.5 43 37.5 10.2 40 480 9.5 10 10 9 100 90 mkp1848612094p* 15 24 44 42 37.5 10.2 40 600 11 12 8 7 100 90 mkp1848615094p* 16 24 44 42 37.5 10.2 40 640 11 12 8 7 100 90 mkp1848616094p* 20 30 45 42 37.5 10.2 / 20.3 40 800 14 15.5 6 5 100 90 mkp1848620094p* 15 25 45 57.5 52.5 10.2 20 300 9 9.5 14 12 200 185 mkp1848615094y* 20 25 45 57.5 52.5 10.2 20 400 9.5 10 12 11 200 185 mkp1848620094y* 22 25 45 57.5 52.5 10.2 20 440 10 10.5 11 10 200 185 mkp1848622094y* 25 30 45 57.5 52.5 20.3 20 500 11 11.5 10 9 200 185 mkp1848625094y* 30 30 45 57.5 52.5 20.3 20 600 12.5 13 8 7 200 185 mkp1848630094y* 35 35 50 57.5 52.5 20.3 20 700 14.5 15.5 7 6 200 185 mkp1848635094y* 40 35 50 57.5 52.5 20.3 20 800 15.5 17 6 5 200 185 mkp1848640094y* 45 45 45 57.5 52.5 20.3 20 900 - 16.5 - 5 - 185 mkp1848645094y5 50 45 45 57.5 52.5 20.3 20 1000 - 18.5 - 4 - 185 mkp1848650094y5 100 70 65 57.5 52.5 20.3 20 2000 - 26.5 - 3.3 - 205 mkp1848710094y5 (6) 200 130 65 57.5 52.5 20.3 20 4000 - 48.5 - 1.6 - 205 mkp1848720094y5 (7) 1100 u opdc at 70 c = 1350 v, u opdc at 105 c = 800 v 1 11 21 32 27.5 - 95 95 3 - 45.5 - 45 - mkp1848510914k2 2 15 25 32 27.5 - 95 190 4.5 - 23 - 45 - mkp1848520914k2 3 18 28 32 27.5 - 95 285 6 - 15.5 - 45 - mkp1848530914k2 4 21 31 32 27.5 - 95 380 8 - 11.5 - 45 - mkp1848540914k2 5 20 35 32 27.5 - 95 475 9 - 9.5 - 45 - mkp1848550914k2 5 18.5 35.5 43 37.5 10.2 45 225 6.5 7 18 16 90 80 mkp1848550914p* 6 18.5 35.5 43 37.5 10.2 45 270 7 7.5 15 13.5 90 80 mkp1848560914p* 7 21.5 38.5 43 37.5 10.2 45 315 8 8.5 13 11.5 90 80 mkp1848570914p* 8 21.5 38.5 43 37.5 10.2 45 360 9 9.5 11 10 90 80 mkp1848580914p* 9 24 44 42 37.5 10.2 45 405 10 10.5 10 9 90 80 mkp1848590914p* 10 24 44 42 37.5 10.2 45 450 10.5 11 9 8 90 80 mkp1848610914p* 12 30 45 42 37.5 10.2 / 20.3 45 540 12.5 13.5 7.5 6.5 90 80 mkp1848612914p* electrical data and ordering code u ndc at 85 c (v) cap. (8) (f) dimension (5) (mm) p1 (mm) p2 (mm) dv/dt (v/s) i peak (a) i rms (2) (a) esr (3) (m ? ) tan ? 10 khz (< 10 -4 ) (4) ordering code (1) wh l 2 pins 4 pins 2 pins 4 pins 2 pins 4 pins
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 7 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) change the * symbol with special code for the terminals (2) maximum rms current at 10 khz, +85 c, ? t = +15 c, capaci tance tolerance ? 5 % (3) equivalent series resi stance typical values at f = 10 khz to 100 khz for p = 27.5 mm, at f = 10 khz to 70 khz for p = 37.5 mm, at f = 10 khz to 50 khz for p = 52.5 mm (4) maximum tan ? values (5) standard dimension (6) 6 pins (7) 12 pins (8) intermediate capacitance values available on request 1100 u opdc at 70 c = 1350 v, u opdc at 105 c = 800 v 10 25 45 57.5 52.5 10.2 23 230 8 8.5 18 16 175 155 mkp1848610914y* 12 25 45 57.5 52.5 10.2 23 276 8.5 9 15 13 175 155 mkp1848612914y* 15 25 45 57.5 52.5 10.2 23 345 9.5 10.5 12 10.5 175 155 mkp1848615914y* 20 30 45 57.5 52.5 20.3 23 460 11.5 12.5 9 8 175 155 mkp1848620914y* 22 35 50 57.5 52.5 20.3 23 506 13.5 14.5 8 7 175 155 mkp1848622914y* 25 35 50 57.5 52.5 20.3 23 575 14.5 15 7 6.5 175 155 mkp1848625914y* 30 45 45 57.5 52.5 20.3 23 690 - 16.5 - 5 - 155 mkp1848630914y5 60 70 65 57.5 52.5 20.3 23 1380 - 40 - 2.5 - 180 mkp1848660914y5 (6) 70 70 65 57.5 52.5 20.3 23 1610 - 34.5 - 2 - 180 mkp1848670914y5 (6) 120 130 65 57.5 52.5 20.3 23 2760 - 39.5 - 2.4 - 180 mkp1848712914y5 (7) 140 130 65 57.5 52.5 20.3 23 3220 - 43.5 - 2 - 180 mkp1848714914y5 (7) 1200 u opdc at 70 c = 1500 v, u opdc at 105 c = 850 v 1 11 21 32 27.5 - 100 100 3 - 43 - 40 - mkp1848510924k2 2 15 25 32 27.5 - 100 200 5 - 21.5 - 40 - mkp1848520924k2 3 18 28 32 27.5 - 100 300 6.5 - 14.5 - 40 - mkp1848530924k2 4 21 31 32 27.5 - 100 400 8 - 11 - 40 - mkp1848540924k2 5 18.5 35.5 43 37.5 10.2 48 240 6.5 7 17 15 80 70 mkp1848550924p* 6 18.5 35.5 43 37.5 10.2 48 288 7.5 8 14 12.5 80 70 mkp1848560924p* 7 21.5 38.5 43 37.5 10.2 48 336 8.5 9 12 11 80 70 mkp1848570924p* 8 21.5 38.5 43 37.5 10.2 48 384 9 9.5 10.5 9.5 80 70 mkp1848580924p* 9 24 44 42 37.5 10.2 48 432 10.5 11 9.5 8.5 80 70 mkp1848590924p* 10 24 44 42 37.5 10.2 48 480 11 11.5 8.5 7.5 80 70 mkp1848610924p* 12 30 45 42 37.5 10.2 / 20.3 48 576 13 13.5 7 6.5 80 70 mkp1848612924p* 10 25 45 57.5 52.5 10.2 24 240 8 8.5 17 15 165 150 mkp1848610924y* 12 25 45 57.5 52.5 10.2 24 288 9 9.5 14 12.5 165 150 mkp1848612924y* 15 25 45 57.5 52.5 10.2 24 360 10 10.5 11 10 165 150 mkp1848615924y* 20 35 50 57.5 52.5 20.3 24 480 13 14 8.5 7.5 165 150 mkp1848620924y* 22 35 50 57.5 52.5 20.3 24 528 14 14.5 7.5 7 165 150 mkp1848622924y* 25 35 50 57.5 52.5 20.3 24 600 15 15.5 6.5 6 165 150 mkp1848625924y* 30 45 45 57.5 52.5 20.3 24 720 - 16.5 - 5 - 150 mkp1848630924y5 60 70 65 57.5 52.5 20.3 24 1440 - 23 - 4.5 - 170 mkp1848660924y5 (6) 120 130 65 57.5 52.5 20.3 24 2280 - 40.5 - 2.3 - 170 mkp1848712924y5 (7) electrical data and ordering code u ndc at 85 c (v) cap. (8) (f) dimension (5) (mm) p1 (mm) p2 (mm) dv/dt (v/s) i peak (a) i rms (2) (a) esr (3) (m ? ) tan ? 10 khz (< 10 -4 ) (4) ordering code (1) wh l 2 pins 4 pins 2 pins 4 pins 2 pins 4 pins
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 8 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 packaging information u ndc at 85 c (v) height (mm) cap. (5) (f) ? dt ordering code (1) mass (g) spq (2) (pcs) 450 u opdc at 70 c = 500 v, u opdc at 105 c = 300 v 19 1 0.8 mkp1848510454k2 6 160 19 2 0.8 mkp1848520454k2 5.5 160 21 3 0.8 mkp1848530454k2 8.5 130 21 4 0.8 mkp1848540454k2 8.5 130 23 5 0.8 mkp1848550454k2 10.5 115 25 6 0.8 mkp1848560454k2 12.5 100 25 7 0.8 mkp1848570454k2 11.5 100 28 8 0.8 mkp1848580454k2 15 80 28 9 0.8 mkp1848590454k2 16 80 28 10 0.8 mkp1848610454k2 15 80 31 12 0.8 mkp1848612454k2 21.5 65 35 15 0.8 mkp1848615454k2 20 70 35.5 10 1.0 mkp1848610454p* 34 105 35.5 12 1.0 mkp1848612454p* 32 105 35.5 15 1.0 mkp1848615454p* 30 105 38.5 20 1.0 mkp1848620454p* 36 91 38.5 22 1.0 mkp1848622454p* 38 91 38.5 25 1.0 mkp1848625454p* 36 91 44 30 1.0 mkp1848630454p* 48 77 45 35 1.0 mkp1848635454p* 57 63 45 40 1.0 mkp1848640454p* 60 63 45 40 1.2 mkp1848640454y* 66 55 45 45 1.2 mkp1848645454y* 70 55 45 50 1.2 mkp1848650454y* 88 45 45 55 1.2 mkp1848655454y* 96 45 45 60 1.2 mkp1848660454y* 91 45 50 65 1.2 mkp1848665454y* 100 40 50 70 1.2 mkp1848670454y* 112 40 50 75 1.2 mkp1848675454y* 108 40 50 80 1.2 mkp1848680454y* 102 40 45 90 1.2 mkp1848690454y5 127 30 45 95 1.2 mkp1848695454y5 124 30 45 100 1.2 mkp1848710454y5 120 30 65 200 1.2 mkp1848720454y5 (3) 266 20 65 400 1.2 mkp1848740454y5 (4) 490 10 700 u opdc at 70 c = 800 v, u opdc at 105 c = 500 v 19 1 0.8 mkp1848510704k2 6 160 19 2 0.8 mkp1848520704k2 5.5 160 21 3 0.8 mkp1848530704k2 8.5 130 23 4 0.8 mkp1848540704k2 10.5 115 25 5 0.8 mkp1848550704k2 12 100 28 6 0.8 mkp1848560704k2 17 80 28 7 0.8 mkp1848570704k2 16 80
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 9 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 700 u opdc at 70 c = 800 v, u opdc at 105 c = 500 v 28 8 0.8 mkp1848580704k2 15 80 31 9 0.8 mkp1848590704k2 22 65 31 10 0.8 mkp1848610704k2 21 65 35 12 0.8 mkp1848612704k2 20 70 35.5 10 1.0 mkp1848610704p* 34 105 35.5 12 1.0 mkp1848612704p* 32 105 35.5 15 1.0 mkp1848615704p* 30 105 38.5 20 1.0 mkp1848620704p* 36 91 44 22 1.0 mkp1848622704p* 49 77 44 25 1.0 mkp1848625704p* 47 77 45 30 1.0 mkp1848630704p* 62 63 45 35 1.0 mkp1848635704p* 55 63 45 30 1.2 mkp1848630704y* 76 55 45 35 1.2 mkp1848635704y* 71 55 45 40 1.2 mkp1848640704y* 66 55 45 45 1.2 mkp1848645704y* 95 45 45 50 1.2 mkp1848650704y* 88 45 50 55 1.2 mkp1848655704y* 112 40 50 60 1.2 mkp1848660704y* 107 40 50 65 1.2 mkp1848665704y* 100 40 45 70 1.2 mkp1848670704y5 128 30 45 75 1.2 mkp1848675704y5 123 30 45 80 1.2 mkp1848680704y5 119 30 65 160 1.2 mkp1848716704y5 (3) 264 20 65 320 1.2 mkp1848732704y5 (4) 359 10 800 u opdc at 70 c = 900 v, u opdc at 105 c = 570 v 19 1 0.8 mkp1848510084k2 6.5 160 21 2 0.8 mkp1848520084k2 9 130 23 3 0.8 mkp1848530084k2 11 115 25 4 0.8 mkp1848540084k2 12 100 28 5 0.8 mkp1848550084k2 17 80 28 6 0.8 mkp1848560084k2 16 80 31 7 0.8 mkp1848570084k2 23 65 31 8 0.8 MKP1848580084K2 21 65 35 9 0.8 mkp1848590084k2 21 70 35.5 10 1.0 mkp1848610084p* 32 105 35.5 12 1.0 mkp1848612084p* 30 105 38.5 15 1.0 mkp1848615084p* 37 91 44 20 1.0 mkp1848620084p* 47 77 45 22 1.0 mkp1848622084p* 65 63 45 25 1.0 mkp1848625084p* 61 63 45 30 1.2 mkp1848630084y* 69 55 45 35 1.2 mkp1848635084y* 97 45 packaging information u ndc at 85 c (v) height (mm) cap. (5) (f) ? dt ordering code (1) mass (g) spq (2) (pcs)
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 10 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 800 u opdc at 70 c = 900 v, u opdc at 105 c = 570 v 45 40 1.2 mkp1848640084y* 91 45 50 45 1.2 mkp1848645084y* 112 40 50 50 1.2 mkp1848650084y* 104 40 45 55 1.2 mkp1848655084y5 131 30 45 60 1.2 mkp1848660084y5 125 30 65 120 1.2 mkp1848712084y5 (3) 276 20 65 240 1.2 mkp1848724084y5 (4) 393 10 900 u opdc at 70 c = 1100 v, u opdc at 105 c = 650 v 19 1 0.8 mkp1848510094k2 6 160 23 2 0.8 mkp1848520094k2 11 115 25 3 0.8 mkp1848530094k2 12 100 28 4 0.8 mkp1848540094k2 16.5 80 31 5 0.8 mkp1848550094k2 22.5 65 31 6 0.8 mkp1848560094k2 21 65 35 7 0.8 mkp1848570094k2 21 70 35.5 5 1.0 mkp1848550094p* 32 105 35.5 6 1.0 mkp1848560094p* 30 105 35.5 7 1.0 mkp1848570094p* 33 105 35.5 8 1.0 mkp1848580094p* 31 105 35.5 9 1.0 mkp1848590094p* 30 105 38.5 10 1.0 mkp1848610094p* 39 91 38.5 12 1.0 mkp1848612094p* 36 91 44 15 1.0 mkp1848615094p* 47 77 44 16 1.0 mkp1848616094p* 45 77 45 20 1.0 mkp1848620094p* 57 63 45 15 1.2 mkp1848615094y* 70 55 45 20 1.2 mkp1848620094y* 73 55 45 22 1.2 mkp1848622094y* 70 55 45 25 1.2 mkp1848625094y* 98 45 45 30 1.2 mkp1848630094y* 89 45 50 35 1.2 mkp1848635094y* 109 40 50 40 1.2 mkp1848640094y* 99 40 45 45 1.2 mkp1848645094y5 124 30 45 50 1.2 mkp1848650094y5 117 30 65 100 1.2 mkp1848710094y5 (3) 259 20 65 200 1.2 mkp1848720094y5 (4) 608 10 1100 u opdc at 70 c = 1350 v, u opdc at 105 c = 800 v 21 1 0.8 mkp1848510914k2 9 130 25 2 0.8 mkp1848520914k2 12 100 28 3 0.8 mkp1848530914k2 16 80 31 4 0.8 mkp1848540914k2 21.5 65 35 5 0.8 mkp1848550914k2 21.5 70 35.5 5 1.0 mkp1848550914p* 33 105 packaging information u ndc at 85 c (v) height (mm) cap. (5) (f) ? dt ordering code (1) mass (g) spq (2) (pcs)
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 11 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) change the * symbol with special code for the terminals (2) spq = standard packing quantity (3) 6 pins (4) 12 pins (5) intermediate capacitance values available on request 1100 u opdc at 70 c = 1350 v, u opdc at 105 c = 800 v 35.5 6 1.0 mkp1848560914p* 30 105 38.5 7 1.0 mkp1848570914p* 39 91 38.5 8 1.0 mkp1848580914p* 37 91 44 9 1.0 mkp1848590914p* 50 77 44 10 1.0 mkp1848610914p* 48 77 45 12 1.0 mkp1848612914p* 63 63 45 10 1.2 mkp1848610914y* 81 55 45 12 1.2 mkp1848612914y* 77 55 45 15 1.2 mkp1848615914y* 70 55 45 20 1.2 mkp1848620914y* 91 45 50 22 1.2 mkp1848622914y* 115 40 50 25 1.2 mkp1848625914y* 108 40 45 30 1.2 mkp1848630914y5 126 30 65 60 1.2 mkp1848660914y5 (3) 256 20 65 70 1.2 mkp1848670914y5 (3) 257 20 65 120 1.2 mkp1848712914y5 (4) 606 10 65 140 1.2 mkp1848714914y5 (4) 608 10 1200 u opdc at 70 c = 1500 v, u opdc at 105 c = 850 v 21 1 0.8 mkp1848510924k2 9 130 25 2 0.8 mkp1848520924k2 11.5 100 28 3 0.8 mkp1848530924k2 15 80 31 4 0.8 mkp1848540924k2 20 65 35.5 5 1.0 mkp1848550924p* 31 105 35.5 6 1.0 mkp1848560924p* 29 105 38.5 7 1.0 mkp1848570924p* 37 91 38.5 8 1.0 mkp1848580924p* 35 91 44 9 1.0 mkp1848590924p* 48 77 44 10 1.0 mkp1848610924p* 45 77 45 12 1.0 mkp1848612924p* 60 63 45 10 1.2 mkp1848610924y* 79 55 45 12 1.2 mkp1848612924y* 74 55 45 15 1.2 mkp1848615924y* 67 55 50 20 1.2 mkp1848620924y* 115 40 50 22 1.2 mkp1848622924y* 109 40 50 25 1.2 mkp1848625924y* 100 40 45 30 1.2 mkp1848630924y5 119 30 65 60 1.2 mkp1848660924y5 (3) 264 20 65 120 1.2 mkp1848712924y5 (4) 612 10 packaging information u ndc at 85 c (v) height (mm) cap. (5) (f) ? dt ordering code (1) mass (g) spq (2) (pcs)
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 12 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 construction description low inductive wound cell elements of metallized polypropy lene film, potted with resi n in a flame retardant case. specific method of mounting to withstand vibration and shock the capacitor unit is designed for mounting on a printed circuit board. in order to withstand vibration and shock te sts, it must be insured that the stand-of f pips are in good contact with the printe d circuit board. the capacitors shall be mechanically fixed by the leads and the body clamped. space requirements on printed-circuit board for product height with seating plane as given by iec 60717 as reference. for 2 pins: the maximum space for length (l max. ), width (w max. ) and height (h max. ) of film capacitors to take in account on the printed circuit board is shown in the drawings. ? for products with 15 mm < pitch ? 27.5 mm ? w = ? l = 0.5 mm and ? h = 0.1 mm ? for products with pitch = 37.5 mm, ? w = ? l = 0.7 mm and ? h = 0.5 mm ? for products with pitch = 52.5 mm, ? w = ? l = 1.0 mm and ? h = 0.5 mm eccentricity defined as in drawing. the maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. ? the maximum length and wi dth of film capacitors is shown in the figure: for 4 pins, 6 pins, and 12 pins: dimensions in millimeters p1 l max. w max. ? d h 37.5 i + 1.5 w + 1.8 1.5 h + 0.5 52.5 i + 1.8 w + 2.0 1.7 h + 0.5 eccentricity w max. = w + w h max. = h + h i max. = i + i seating plane l max. p1 w max. p2 2 x p2 0.5 mm 3 x p2 0.5 mm 4 x p2 0.5 mm 5 x p2 0.5 mm ? d
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 13 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 soldering conditions for general soldering conditions and wave solder ing profile, we refer to the application note: ? soldering guidelines for film capacitors: www.vishay.com/doc?28171 storage temperature t stg = -25 c to +35 c with rh ma ximum 75 % without condensation. ratings and characteristics reference conditions unless otherwise specified, all el ectrical values apply to an ambi ent temperature of 23 c 1 c, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % 2 %. for reference testing, a conditioning period shall be applied ov er 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relati ve humidity not exceeding 20 %. characteristics capacitance (typical curve) lifetime expectancy (typical curve) impedance vs. frequency (typical curve) insulation resistance (typical curve) - 60 c/c (%) 4 3 0 - 2 - 3 - 1 - 4 - 5 - 6 2 1 - 40 - 20 20 40 60 80 100 120 t amb (c) 0 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 10 3 10 4 10 5 10 6 105 c 85 c 70 c u opdc /u ndc (v) lifetime expectancy (h) 10 4 10 5 10 6 10 7 z ( ) 10.0 1.0 0.1 0.01 0.001 pitch 37.5 mm 10 f 40 f f (hz) 10 5 10 4 10 3 0 20 40 60 80 100 t amb (c) rc (s)
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 14 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 impedance vs. frequency (typical curve) impedance vs. frequency (typical curve) maximum i rms current in function of the ambient temperature 100 10 1 0.1 0.001 0.01 10 4 10 5 10 7 10 6 pitch 27.5 mm 1 f 12 f f (hz) z ( ) 10 4 10 5 10 6 10 7 z ( ) 10.0 1.0 0.1 0.01 0.001 pitch 52.5 mm 40 f 80 f f (hz) heat conductivity dimensions (mm) heat conductivity (mw/c) wh l 9.0 19.0 32.0 24 11.0 21.0 32.0 28 13.0 23.0 32.0 32 15.0 25.0 32.0 36 18.0 28.0 32.0 44 21.0 31.0 32.0 51 21.0 35.0 32.0 56 18.5 35.5 43.0 54 21.5 38.5 43.0 61 24.0 44.0 42.0 70 30.0 45.0 42.0 81 25.0 45.0 57.5 77 30.0 45.0 57.5 85 35.0 50.0 57.5 100 45.0 45.0 57.5 94 70.0 65.0 57.5 152 130.0 65.0 57.5 243 50 60 70 80 90 100 110 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 i rms operational/i rms max. maximum ambient temperature (c)
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 15 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power dissipation and maximum component temperature rise the power dissipation must be limited in order not to exceed the maximum al lowed component temperature rise as a function of the free air a mbient temperature. ? the component tempe rature rise ( ? t) can be measured or calculated by ? t = p/g: ? ? t = t c - t amb = case temperature rise (c) with a maximum of 15 c at rated temperature. ? p = i rms 2 x esr = power dissipation of the component (mw) ? g = heat conductivity of the component (mw/c) measuring the component temperature the case temperature is measured in unloaded (t amb ) and maximum loaded condition (t c ). ? to avoid thermal radiation or convection , the capacitor must be tested in a closed area from air circulation. application note and limiting conditions these capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. ? these mains applications are strictly regu lated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. to select the capacitor for a certain application, the following conditions must be checked: ? the continuous peak voltage (u p+ ) shall not exceed the rated dc voltage rating (u ndc ) ? the peak-to-peak ripple voltage (u pp ) shall not be greater than 0.2 x (u ndc ) ? for capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. for information depending of the capacitance value an d the number of parallel connections contact: dc-film@vishay.com ? the voltage peak slope (du/dt) shall not exceed the pulse slope at the dc voltage rating. ? if the pulse voltage is lower than the rated dc voltag e, the rated voltage pulse slope may be multiplied by u ndc and divided by the applied voltage. ? for all other pulses following equation must be fulfilled: ? ? ? ? ? t is the pulse duration maximum repetitive peak voltages the capacitor unit may be subjected to the following surge without any significant reduction of lifetime expectancy repetitive surge voltage maximum duration per day 1.1 x u ndc 30 % on load duration 1.15 x u ndc 30 min 1.2 x u ndc 5 min 1.3 x u ndc 1 min 1.5 x u ndc 110 ms thermocouple u p+ u ndc u p- voltage (v) t non reversin g recurrent waveform 2 x du dt ------- ?? ?? 2 x dt u ndc x du dt ------- ?? ?? rated ? 0 t ?
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 16 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 inspection requirements general notes sub-clause numbers of tests an d performance requirements refer to the secti onal specification, pu blication iec 61071. sub-clause number and test cond itions performance requirements routine test-final inspection 5.14.2.1 external inspection, ? visual examination ? legible marking as specified 5.14.2.2 dimensions ? see specification drawing 5.3.1 capacitance 1 khz at room temperature see specific reference data ? 5.3.2 tan ? 1 khz at room temperature ? 10 khz at room temperature ? see specific reference data 5.5.1.2 voltage test be tween terminal 1.5 x u ndc at t amb ? duration 10 s ? no visible damage or puncture ? no flashover 5.7 insulation resistance u ndc ? 500 v measuring voltage 100 v ? at room temperature ? ? u ndc > 500 v measuring voltage 500 v ? at room temperature ? duration 1 min see specific reference data type tests 5.14.2 external inspection check for finish, marking and overall dimensions legible marking and finish as specified ? dimensions: see sp ecific drawing ? 5.14.0 initial measuremen ts capacitance at 1 khz ? tan ? at 10 khz ? 5.14.1.1.4 robustness of terminations ? iec 60068-2-21 tensile ua1 ? wire diameter section load ? ? 0.8 mm ? 0.5 mm 2 10 n ? ? 1.25 mm ? 1.2 mm 2 20 n ? duration 10 s 1 s ? ? bending ub method 1 ? wire diameter section load ? ? 0.8 mm ? 0.05 mm 3 10 n ? ? 1.25 mm ? 0.019 mm 3 20 n ? 4 x 90 , ? duration 2 s to 3 s/bend ? 5.14.1.6 resistance to soldering heat ? iec 60068-2-20 no predrying, method 1a ? solder bath: 260 c ? duration 10 s 1 s ? 5.14.4 final measur ements capacitance ? tan ? | ? c/c| ? 0.5 % ? increase of tan ??? 0.0050 ? compared to values measured in 5.14.0 ? 5.14.0 initial measuremen ts capacitance at 1 khz ? tan ? at 10 khz
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 17 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 type tests 5.14.3.1 vibration ? iec 60068-2-6 10 hz to 55 hz: amplitude 0.35 mm or acceleration 98 m/s 2 ? ? test duration: 10 freq uency cycles, 3 axes offset from each other by 90 ? 1 octave/min ? visual examination ? ? ? ? ? ? ? no visible damages 5.14.3.2 shock or impact ? iec 60068-2-6 ? pulse shape: half sine ? acceleration: 490 m/s 2 ? duration t of pulse: 11 ms ? visual examination ? ? ? ? no visible damage 5.14.4 final measur ements capacitance ? tan ? | ? c/c| ? 0.5 % ? increase of tan ??? 0.0050 ? compared to values measured in 5.14.0 5.5.3.1 initial measuremen ts capacitance at 1 khz ? tan ? at 10 khz ? r insulation ? 5.5.3.2 voltage test be tween terminal 1.5 x u ndc at t amb ? duration 60 s ? 5.5.3.3 final measur ements capacitance ? tan ? ? r insulation | ? c/c| ? 0.5 % ? increase of tan ??? 1.2 initial tan ? + 0.0001 ? r insulation ? 50 % of specified values 5.9.1 initial measuremen ts capacitance at 1 khz ? tan ? at 10 khz ? 5.9.2 surge discha rge test 1.1 x u ndc ? number of discharges: 5 ? time lapse: every 2 min (10 min total) ? 5.9.3 voltage test between terminal within 5 min after the surge discharge test ? duration 60 s ? 1.5 x u ndc at t amb ? 5.9.3 final measurements capacitance ? tan ? at 10 khz ? | ? c/c| ? 1.0 % ? tan ??? 1.2 initial tan ? + 0.0001 ? compared to values measured in 5.9.1 5.11.1 initial measuremen ts capacitance at 1 khz ? tan ? at 10 khz ? 5.11.2 self healing test 1.5 x u ndc ? duration 10 s ? number of clearings ? 5 ? clearing = voltage drop of 5 % ? increase the voltage at 100 v/s till 5 clearings occur ? with a max. of 2.5 x u ndc ? for a duration of 10 s ? 5.11.3 final measur ements capacitance ? tan ? | ? c/c| ? 0.5 % ? tan ??? 1.2 x initial tan ? + 0.0001 ? compared to values measured in 5.11.1 sub-clause number and test cond itions performance requirements
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 18 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 type tests 5.13.0 initial me asurements capacitance at 1 khz ? tan ? at 10 khz ? 5.13.1 change of temperature ? acc. to iec 60068-2-14 test nb ? t max. = 85 c ? t min. = -40 c ? transition time: 1 h, eq uivalent to 1 c/min ? 5.13.2 damp heat steady state ? acc. to iec 60068-2-78 test ca ? t max. = 40 c 2 c ? rh = 93 % 3 % ? duration 56 days 5.5.3.2 voltage test between terminal 1.5 x u ndc at ambient temperature ? duration 60 s ? 5.13.3 final measurements visual exam ination no puncturi ng or flashover ? self healing punctures are permitted ? capacitance ? tan ? at 1 u rms 10 khz ? | ? c/c| ? 2.0 % ? increase of tan ??? 0.0150 ? compared to values measured in 5.13.0 5.10.0 initial me asurements capacitance at 1 khz ? tan ? at 10 khz ? 5.10.1 thermal stability test under ? overload conditions natural cooling t amb 5 c ? 1.21 x p max. = (u 2 /2) x w 2 x c x tan ? = ? 121 x (i 2 max. /w 2 x c) x tan ? 2 with ? w 2 = 2 x p x f 2 for i max. ? (see specific reference data) ? f 2 = 10 khz ? duration 48 h ? 5.10.2 final measurements measure th e temperature every 1.5 h during the last 6 h ? capacitance ? tan ? at 10 khz temperature rise < 1 c ? | ? c/c| ? 2 % ? increase of tan ??? 1.2 x initial ? + 0.0150 5.12 resonance frequency measurem ent impedance analyzer at t amb < 0.9 times the value as specified in typical curve resonant frequency of this specification 5.10.0 initial me asurements capacitance at 1 khz ? tan ? at 10 khz ? 5.15.1 endurance test be tween terminals sequence ? 1.4 x u ndc at t max. = 85 c ? 1.4 x u opdc at 105 c ? duration 250 h ? 1000 x discharge at 1.4 x i (maximum repetitive peak curr ent in continuous operation) ? 1.4 x u ndc at t max. = 85 c ? 1.4 x u opdc at 105 c ? duration 250 h ? 5.15.2 final measurements capacitance ? tan ? | ? c/c| ? 3 % ? increase of tan ??? 0.0150 ? compared to values measured in 5.15.0 sub-clause number and test cond itions performance requirements
mkp1848 dc-link www.vishay.com vishay roederstein revision: 19-feb-16 19 document number: 28164 for technical questions, contact: dc-film@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 type tests 5.16.3.0 initial me asurements capacitance at 1 khz ? at t max. = 85 c ? 5.16.3.1 destruction test sequence ? high dc voltage test product enveloped with cheese cloth ? 3 x u ndc or dc voltage ? until repetitive prod uct healings occur duration = 15 min ? audible healings or check healings with oscilloscope high ac voltage test ac rms voltage = u ndc x 2 ? 2 ? with minimum of 250 v ac ? duration = 5 min ? repeat destructio n sequence 3 x ? 5.16.3.2 final measurements visual exam ination no puncturi ng or flashover ? self healing punctures are permitted sub-clause number and test cond itions performance requirements
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of MKP1848580084K2

	To Download MKP1848580084K2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .